Tag: wireless connectivity
28 January 2014 - 2:07, by , in Case Studies, No comments
Harris Communications implements commercial repeater solution for health care companies administrative building. Copper system with spot coverage, designed to accommodate key areas in the facility.
27 January 2014 - 2:05, by , in Blog, No comments
Great question!  Most likely, the trees between you and the tower have leafed out.  We have had a few situations in which a clients reception was impacted by the trees around their office building. 
27 January 2014 - 2:05, by , in FAQ, 1 comment
This is a data link protocol commonly used to establish a direct connection between two networking nodes.  It can provide connection authentication, transmission encryption privacy and compression.  Point to Point Connectivity is wireless can allows for the elimination of leased T-1 lines or redundancy of existing T-1 lines.  This solution is available encrypted for sensitive...
27 January 2014 - 2:05, by , in Case Studies, No comments
Harris Communications worked in this historical building recently remodeled into the Ace Hotel. We implemented a multi-carrier solution to ensure reliable cell phone reception.
27 January 2014 - 2:05, by , in Blog, No comments
It is important to be able to determine the cellular signal in and around your building for us to provide an accurate budgetary cost to you. Check out the information below that details how to put the various cellular phones in test mode. If you do not see your particular cellular phone on our list...
27 January 2014 - 2:05, by , in Blog, No comments
Came across this article when I was checking out the news in our region.  The area that is referenced is long overdue for cellular coverage. This just reaffirms how much society relies on and expects quality cellular coverage: New Tower Might Help With Dropped Calls in Rural York County A new cell tower planned in...
27 January 2014 - 2:05, by , in Case Studies, No comments
Harris Communications works with Hospital in Charleston, SC market to design, implement and test a cellular repeater solution. The solution is all fiber, multi-carrier and covers the entire facility.
19 January 2014 - 0:06, by , in Blog, 11 comments
A commercial cellular repeater or cellular booster is a type of bi-directional amplifier (BDA) as commonly named in the wireless telecommunications industry.  The device is used for boosting the cell phone reception to a designated through the usage of an antenna for reception, an amplified signal and an internal rebroadcast antenna.
17 January 2014 - 0:02, by , in FAQ, No comments
Bandwidth has several related meanings, for our purposes in the wireless industry there are two primary definitions: Bandwidth (computer)digital bandwidth: a rate of data transfer, throughput or bit rate, measured in bits per second (bps). Bandwidth (signal processing) or analog bandwidth, frequency bandwidth or radio bandwidth: a measure of the width of a range of...
1 January 2014 - 20:38, by , in FAQ, No comments
Our engineers custom design wireless solutions for our clients to suit specific needs.  
An advertisement to get better in-building cell phone and emergency radio coverage.