Tag: Cellular Enhancement
28 January 2014 - 2:07, by , in Case Studies, Comments off
Harris Communications works with boutique hotel in historic location to design and install a commercial cellular repeater solution.
28 January 2014 - 2:07, by , in Case Studies, No comments
Harris Communications works with an international finance company to design and install a multi-carrier cellular repeater solution for their national US office.
28 January 2014 - 2:07, by , in Case Studies, No comments
Harris Communications implements commercial repeater solution for health care companies administrative building. Copper system with spot coverage, designed to accommodate key areas in the facility.
28 January 2014 - 2:07, by , in Blog, 4 comments
Harris Communications has worked with hospitals throughout the country to eliminate dropped calls with the installation of commercial cellular repeaters.
28 January 2014 - 2:07, by , in FAQ, No comments
A Yagi antenna, also known as a Yagi-Uda array or simply aYagi, is a unidirectional antenna commonly used in communications when a frequency is above 10 MHz.  This type of antenna is low profile and ideal for cellular enhancement applications.
28 January 2014 - 2:07, by , in Case Studies, 1 comment
Harris Communications recently completed the 2nd and final phase of the commercial cellular project for the Van Andel Cancer Institute.  This facility’s 2nd phase is a Leed Certified building and we extended our 1st phase multi-carrier distributed antenna system (DAS) into it adding Nextel in addition to providing  in-building coverage with Verizon and AT&T.
28 January 2014 - 2:07, by , in Blog, 2 comments
Although everyone expects the voice and data capabilities of their mobile devices to simply work everywhere, there are significant technical and financial challenges to making this a reality. This post provides an overview of distributed antenna system (DAS) solutions for in-building wireless coverage for cellular voice services. It also provides a brief look at the...
28 January 2014 - 2:07, by , in Blog, 1 comment
How Cellular Reception Works Cell phone reception is the strength of the connection the cell phone has to its network.  There are a variety of factors that impact cellular signal, such as proximity to a tower.  Most mobile devices use a set of bars of varying heights to display the strength of the signal where...
28 January 2014 - 2:07, by , in FAQ, No comments
A microcell is a cell in a mobile phone network served by a low power cellular base station (tower), covering a limited area such as a mall, a hotel, or a transportation hub. 
27 January 2014 - 2:05, by , in FAQ, 1 comment
This is a data link protocol commonly used to establish a direct connection between two networking nodes.  It can provide connection authentication, transmission encryption privacy and compression.  Point to Point Connectivity is wireless can allows for the elimination of leased T-1 lines or redundancy of existing T-1 lines.  This solution is available encrypted for sensitive...
An advertisement to get better in-building cell phone and emergency radio coverage.