Category: Blog
26 January 2014 - 1:34, by , in Blog, 13 comments
Some solutions can be as simple and inexpensive as placing an antenna booster. If it doesn’t work you’ve lost little. This solution could work for both your mobile and at home needs, but it will depend on how marginal your signal is and what is causing the poor reception. If you determine you need a...
25 January 2014 - 1:15, by , in Blog, No comments
Cell boosters have become an absolute necessity for many people. Buildings, hills, valleys, and proximity all can impact the strength of your cellular or wi-fi signal. It’s terribly frustrating to be in your home or office and have a weak signal that distorts the reception or drops the call. Life will be much easier with...
24 January 2014 - 1:01, by , in Blog, No comments
Cellular Repeater Solutions can be designed to suit any size facility and repeat as few or as many carriers that the building owner desires.  The outline below details how they work:
21 January 2014 - 0:19, by , in Blog, No comments
Hello! I read an article in the NYTimes a few weeks ago and have been meaning to share it with you. It focuses on the spotty coverage that accompanies the iPhone. 
19 January 2014 - 0:06, by , in Blog, 12 comments
A commercial cellular repeater or cellular booster is a type of bi-directional amplifier (BDA) as commonly named in the wireless telecommunications industry.  The device is used for boosting the cell phone reception to a designated through the usage of an antenna for reception, an amplified signal and an internal rebroadcast antenna.
8 January 2014 - 22:20, by , in Blog, 7 comments
DAS is the acronym we use in the wireless industry for DISTRIBUTIVE ANTENNA SYSTEM (DAS).
30 December 2013 - 20:06, by , in Blog, 2 comments
Radio frequency (RF) repeaters work hand in hand with the closest DAS (Distributed Antenna System) to improve the cellular coverage in an area. RF repeaters take a low power signal from a cell phone and exponentially strengthen the signal. The DAS receives signals from local transceiver stations in greater number which magnifies the signals sent...
29 December 2013 - 19:57, by , in Blog, No comments
This is not a surprise to Harris Communications! We hear about the spotty reception and dropped calls that plague our peers and friends throughout Charlotte.
27 December 2013 - 19:46, by , in Blog, No comments
Each frequency range has a band designator and each range of frequencies behaves differently and performs different functions. The frequency spectrum is shared by civil, government, and military users of all nations according to International Telecommunications Union (ITU) radio regulations. For communications purposes, the usable frequency spectrum now extends from about 3Hz to about 300GHz....
26 December 2013 - 19:33, by , in Blog, No comments
Harris Communications has conducted site surveys throughout the United States.  The purpose of a site survey is to determine what type of solution and design will work best for a specific facility.  In most cases it is not feasible to provide an accurate estimate based on square footage of a facility alone.  There are quite...