Author: harrisadmin
26 January 2014 - 1:34, by , in Blog, 13 comments
Some solutions can be as simple and inexpensive as placing an antenna booster. If it doesn’t work you’ve lost little. This solution could work for both your mobile and at home needs, but it will depend on how marginal your signal is and what is causing the poor reception. If you determine you need a...
25 January 2014 - 1:15, by , in Blog, No comments
Cell boosters have become an absolute necessity for many people. Buildings, hills, valleys, and proximity all can impact the strength of your cellular or wi-fi signal. It’s terribly frustrating to be in your home or office and have a weak signal that distorts the reception or drops the call. Life will be much easier with...
24 January 2014 - 1:01, by , in Blog, No comments
Cellular Repeater Solutions can be designed to suit any size facility and repeat as few or as many carriers that the building owner desires.  The outline below details how they work:
23 January 2014 - 0:49, by , in Case Studies, No comments
Harris Communications worked on repeater solutions for the Van Andel Institute in phases. As a biomedical and research center, it was imperative that the building had reliable cellular reception.
21 January 2014 - 0:19, by , in Blog, No comments
Hello! I read an article in the NYTimes a few weeks ago and have been meaning to share it with you. It focuses on the spotty coverage that accompanies the iPhone. 
20 January 2014 - 0:13, by , in FAQ, 1 comment
As defined by PCIA, The Wireless Infastructure Association: A Distributed Antenna Solution, or DAS, is a network of spatially separated antenna nodes connected to a common source via a transport medium that provides wireless service within a geographic area or structure. DAS antenna elevations are generally at or below the clutter level and installations are...
19 January 2014 - 0:06, by , in Blog, 11 comments
A commercial cellular repeater or commercial cellular signal booster is a type of bi-directional amplifier (BDA) as commonly named in the wireless telecommunications industry. The device is used for boosting the cell phone reception to a designated area through the usage of an antenna for reception, an amplified signal and an internal rebroadcast antenna.
17 January 2014 - 0:02, by , in FAQ, No comments
Bandwidth has several related meanings, for our purposes in the wireless industry there are two primary definitions: Bandwidth (computer)digital bandwidth: a rate of data transfer, throughput or bit rate, measured in bits per second (bps). Bandwidth (signal processing) or analog bandwidth, frequency bandwidth or radio bandwidth: a measure of the width of a range of...
11 January 2014 - 22:58, by , in FAQ, No comments
A Wi-Fi enabled device such as a personal computer, mobile phone, MP3 player or video console can connect to the Internet when within range of a wireless network connected to the Internet.
8 January 2014 - 22:20, by , in Blog, 6 comments
DAS is the acronym we use in the wireless industry for DISTRIBUTIVE ANTENNA SYSTEM (DAS).
An advertisement to get better in-building cell phone and emergency radio coverage.